Traxxas

Traxxas Slipper Clutch Rebuild Kit (Heavy Duty)

Traxxas Slipper pressure plate and hub (alloy)

Traxxas Gear Set Metal for Servo 2065R

Traxxas Hollow Balls Steel (22) 1/16-1/18

Traxxas Gear set (for 2070, 2075 servos)

Traxxas Wheel hubs, 17mm hex for Maxx (2)

Traxxas Wheel wrench, splined, 17 mm

Traxxas HOLLOW BALLS plastic (20)

Traxxas Suspension Arms Front/Rear HD Black (Pair)

Traxxas Wheel Hubs Aluminium Hex 12mm (2)

Screws M3x25 Cap-head Hex Socket (6)

Traxxas Wheel Hubs Steel Hex 12mm (2)

Traxxas TQi Telemetry Expander Module 2.0 w/GPS Speed Module 2.0

Traxxas TQi Telemetry GPS Speed Module 2.0

Traxxas TQi Telemetry Expander Module 2.0

Traxxas Seal kit, receiver box (includes o-ring, seals, and silicone grease)

Traxxas Pro Scale Advanced Lighting System Kit

Traxxas Ball bearings, blue rubber sealed (4x8x3mm) (8)

Traxxas Servo, sub-micro, waterproof

Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x11 screw p

Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)

Traxxas portal drive input gear, rear

Traxxas Portal drive output gear, front or rear

Bumper mounts, front and rear/ bumper mount, rear (offset)

Traxxas Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)

Axle, rear, heavy duty (left and right) (requires #8065 rear portal drive input gear)

Traxxas Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Traxxas Driveshaft assembly, rear, extreme heavy duty (1) (left or right) / screw pin (1)

Traxxas Gear, 13T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Traxxas Gear, 27T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Traxxas Gear, 20T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Traxxas Gear, 18T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw

Traxxas Gear, 17T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Traxxas Gear, 14T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

TRAXXAS Sway Bar Wires F and R Set Slash, Stampede - 4x4, Rally

Stabilisatorstag til Slash 4x4, Rally og Stampede

Drive Cup Steel (2)

Body, Hoss™ 4X4 VXL, green/ window, grille, lights decal sheet (assembled with front and rear body mounts and rear body

Body, Hoss™ 4X4 VXL, orange/ window, grille, lights decal sheet (assembled with front and rear body mounts and rear body

Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

Traxxas Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)

Toe link, front and rear (molded composite) (2)/ hollow balls (4) (87mm center to center)

Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

Traxxas Rod Ends, short (6)/ hollow balls (6)

Rod ends, long (6)/ hollow ball connectors (6)

Traxxas Rebuild kit, Ultra shocks (for 2 shocks)

Traxxas PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Rod ends (16 long and 4 short)/ hollow ball connectors (18)/ ball screws (2)

Bearing Adapter Alu Green with Ball Bearing 10x15x4mm

Traxxas spurdrev 54T (1.0M pitch)

Motordrev (Pinion) Herdet Stål 19T 32P

Cable, T-lock (extra long) (for use with TRX-4® Long Arm Lift Kit)

Cable, T-lock (medium) (for use with TRX-4® Long Arm Lift Kit)

Traxxas Cable, T-lock (rear) (TRX-6™)

Differential cover, front or rear (gray)

Differential cover, front or rear (black)

Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft)

Axle shaft, front, heavy duty (left and right) (requires #8064 front portal drive input gear)